Bilco's Bodgements #8

For discussion of the issues faced when building a model or layout - how to replicate wood, what glues to use, exactly how much weathering can a Gnat take, a good source of detailing accessories - you get the picture, I'm sure.

Moderator: GnATTERbox Moderators

User avatar
Bilco
Millegniumer
Millegniumer
Posts: 1137
Joined: Mon Oct 29, 2007 3:55 pm
Location: Woodstock, Oxfordshire
Interests: 7mm & 16mm NG, Gn15

Bilco's Bodgements #8

Postby Bilco » Mon May 09, 2022 2:05 pm

It's been a while since the last Bodgement, but ideas have been bubbling up while I've been sitting around - sometimes I sits and thinks, and sometimes I just sits ...

Anyway, I've seen some of those layouts in the USA, down in their basements, and with scenery from floor to ceiling, and I wondered if I could do somehting on a much smaller scale, and follow up on the scenery in Watts' Yawzes Mine. I also thought I would try making the baseboard from foamboard, just to see if I could ...

So, the components assembled ...

Image

A sheet of 5mm hardboard found in the back of the garage, an unused piece of extruded polystyrene insulation ditto, and a pack of 10 A0 sheets of foam board ...

A bit of cutting later produced these ...

Image

A base cut from the hardboard, and one piece of foamboard cut in half lengthways, and 30 degree angle cut at the ends - which became ...

Image

Top corners of the foamboard cut off and glued to the bottom, and the sheet then glued to the hardboard base - looks like it might get airborne soon ...

Hours of fun ...
Bill

If at first you don't succeed, cheat.
Too soon old, too late smart.

https://sites.google.com/site/myoldlayouts/
https://www.flickr.com/photos/149926300@N07/albums

User avatar
Steve Holland
GnatterBox Centurion
GnatterBox Centurion
Posts: 167
Joined: Wed Nov 20, 2013 8:31 pm
Location: Birmingham, UK
Interests: Narrow gauge railways (WHR and FR in particular), Gn15, 16mm/ft, 7mm/ft, too much going on in life to have a website to look after!

Re: Bilco's Bodgements #8

Postby Steve Holland » Wed May 11, 2022 7:31 pm

Are you sure that this will not become one of the Imperial shuttles from Star Wars? It sort of reminds me a bit of one with its wings folded for landing http://neil-ellis-models.blogspot.com/2015/05/studio-scale-imperial-shuttle-tydirium.html
Now one of those in 1:24 scale..........
Steve Holland

Keep banging the rocks together

User avatar
backwaterscotland
GnatterBox Centurion
GnatterBox Centurion
Posts: 174
Joined: Tue Nov 15, 2011 10:51 am
Location: Edinburgh
Interests: Emett-esque GN15

Re: Bilco's Bodgements #8

Postby backwaterscotland » Fri May 13, 2022 6:08 am

Steve Holland wrote:Are you sure that this will not become one of the Imperial shuttles from Star Wars? It sort of reminds me a bit of one with its wings folded for landing http://neil-ellis-models.blogspot.com/2015/05/studio-scale-imperial-shuttle-tydirium.html
Now one of those in 1:24 scale..........


There is a kit in 1:24 but the $3200 price is scary! https://www.craggsmodels.com/store/imperial-shuttle-studio-scale-1-24-scale-kit-1

Trying to imagine how a layout based on star wars would look :shock:

Bilco - I was involved in designing a 00 gauge West Highland layout a few years ago with a planned hillside that ran from almost floor level to 6 feet to get the same idea but getting the scale right was problematic along with the sheer size everything would be. I'll be interested to see how yours looks.

Andy

User avatar
Bilco
Millegniumer
Millegniumer
Posts: 1137
Joined: Mon Oct 29, 2007 3:55 pm
Location: Woodstock, Oxfordshire
Interests: 7mm & 16mm NG, Gn15

Re: Bilco's Bodgements #8

Postby Bilco » Mon May 16, 2022 6:08 pm

Good guesses chaps ...

Image

... but no, it's one of these ...

Image

Both sides stuck on, a double-skin top in place, and a couple of triangular strengtheners fixed in the corners ...

This is the 'box' into which the track and scenery will fit in due course ...

Hours of fun ...
Bill

If at first you don't succeed, cheat.
Too soon old, too late smart.

https://sites.google.com/site/myoldlayouts/
https://www.flickr.com/photos/149926300@N07/albums

User avatar
Bilco
Millegniumer
Millegniumer
Posts: 1137
Joined: Mon Oct 29, 2007 3:55 pm
Location: Woodstock, Oxfordshire
Interests: 7mm & 16mm NG, Gn15

Re: Bilco's Bodgements #8

Postby Bilco » Mon May 16, 2022 6:14 pm

On to the next step - another piece of foamboard, approximately 2 feet square, was cut out and strengthening pieces glued to the underside ...

Image

The basic shape ...

Image

... and the finished article. Light but strong, it looks rather like one of those mazes that psycologists make rats run around ...

In due course the front corners will be rounded off - tentative curves pencilled in ...

Hours of fun ...
Bill

If at first you don't succeed, cheat.
Too soon old, too late smart.

https://sites.google.com/site/myoldlayouts/
https://www.flickr.com/photos/149926300@N07/albums

User avatar
Bilco
Millegniumer
Millegniumer
Posts: 1137
Joined: Mon Oct 29, 2007 3:55 pm
Location: Woodstock, Oxfordshire
Interests: 7mm & 16mm NG, Gn15

Re: Bilco's Bodgements #8

Postby Bilco » Tue May 17, 2022 2:23 pm

Next up - the track for a simple pizza circle. I had two yard lengths of Peco track in the back of the garage, so the rails were extracted and curved with a home-made bender as described by Steve Bennett. Once the rails were at the right radius (9") they were fed back into the sleeper base ...

Image

Then the odd-looking construction from the last post was turned the right way up, and the track glued down with Woodland Scenics Scenic Glue ...

Image

We have a pizza - well, a bit oval ...

Hours of fun ...
Bill

If at first you don't succeed, cheat.
Too soon old, too late smart.

https://sites.google.com/site/myoldlayouts/
https://www.flickr.com/photos/149926300@N07/albums


Return to “Modelling Matters”

Who is online

Users browsing this forum: No registered users and 15 guests

cron